Wheel bearing · 2026
Nissan Qashqai wheel bearing cost
A wheel bearing replacement on a Nissan Qashqai typically costs £96–£321 per wheel fitted at a UK independent garage. The Qashqai uses sealed bolt-on hub units front and rear with the ABS sensor ring built in — the hub and bearing can't be separated. Premature bearing wear is a recurring topic on UK owner forums, helped along by potholes and kerbs.
Front vs rear: what's the Nissan Qashqai's bearing design?
The design decides the bill. A bolt-on hub unit is a dearer part but a quick fit; a press-in bearing is cheap but needs dismantling and a hydraulic press. Here's how the Qashqai is built:
| Position | Design | What that means |
|---|---|---|
Front | Bolt-on hub unit | J10 (2007–13) onwards uses a sealed hub-and-bearing unit with integrated ABS ring, replaced complete. It fits without pressing, but the old unit often needs driving out and the mounting seat cleaning up due to corrosion. |
Rear | Bolt-on hub unit | A complete bolt-on hub assembly (shared with the X-Trail on the J10). The J11 (2014–21) switched 2WD cars to a torsion beam while 4WD kept multi-link — the bearing is a sealed bolt-on unit in both layouts. |
Nissan Qashqai wheel bearing replacement cost
A single wheel bearing on a Nissan Qashqai typically costs £96–£321 per wheel fitted at a UK independent garage. Sealed hub units cost more in parts but less in labour; press-in bearings the reverse — the total lands in a similar band. Main dealers charge 30–50% more, and London and the South East sit at the top of the range.
Key things to know
- Premature bearing failures crop up regularly on UK Qashqai forums, sometimes well inside the car's expected bearing life — pothole-heavy UK roads accelerate wear.
- Because the ABS sensor ring is part of the sealed unit, a failing bearing can also throw ABS faults.
- Seized fasteners are expected on this model — garages pre-treat with penetrating fluid and wire-brush the hub seat before fitting the new unit.
- The front hub nut is a high-torque 32 mm item, and front replacement means disconnecting several suspension components.
Good question
Questions Okay gets asked a lot
How much does a wheel bearing cost for a Nissan Qashqai?
+
Expect £96–£321 per wheel fitted at a UK independent garage in 2026, covering the bearing or hub unit plus labour. On the Qashqai the front is a bolt-on hub unit — dearer part, quicker fit and the rear is a bolt-on hub unit — dearer part, quicker fit, so quotes can differ front to rear. Main dealers charge more; use our cost calculator to adjust for your region.
Can a worn wheel bearing cause an ABS warning light on a Nissan Qashqai?
+
Yes. The Qashqai's wheel-speed sensor ring is built into the sealed hub/bearing unit, so as the bearing wears and gains play the ABS reading can become erratic and trigger the warning light — sometimes before the hum gets loud. If you have a speed-dependent drone plus an ABS or traction-control light, have the bearings checked first before paying for ABS diagnostics.
What does a worn wheel bearing sound like on a Nissan Qashqai?
+
The classic sign is a humming, droning or growling noise that rises with road speed and often changes when cornering — louder turning one way, quieter the other. On the Qashqai the same noise is regularly confused with tyre wear, so have the wheels spun and checked for play before paying for a bearing. A bearing with noticeable play or roughness is an MOT failure, so don't leave it once it's audible.
Get a price for your Nissan Qashqai
Estimate the wheel bearing cost for your car and region, then compare quotes from trusted local garages.