Wheel bearing · 2026
Toyota Yaris wheel bearing cost
A wheel bearing replacement on a Toyota Yaris typically costs £84–£279 per wheel fitted at a UK independent garage. UK Yaris front bearings are press-in cartridges in the steering knuckle — a knuckle-off, hydraulic-press job — while the rear is a quick four-bolt hub unit on the torsion beam. Bearings are among the more commonly reported Yaris wear items.
Front vs rear: what's the Toyota Yaris's bearing design?
The design decides the bill. A bolt-on hub unit is a dearer part but a quick fit; a press-in bearing is cheap but needs dismantling and a hydraulic press. Here's how the Yaris is built:
| Position | Design | What that means |
|---|---|---|
Front | Press-in bearing | Mk1, Mk2 and Mk3 front bearings are press-in cartridges retained by a snap ring in the knuckle, with the hub pressed into the bearing and an ABS encoder ring in the seal. |
Rear | Bolt-on hub unit | Torsion-beam rear: the complete hub/bearing unit and brake backplate bolt to the trailing arm with four bolts, with the drum sliding off first. |
Toyota Yaris wheel bearing replacement cost
A single wheel bearing on a Toyota Yaris typically costs £84–£279 per wheel fitted at a UK independent garage. Sealed hub units cost more in parts but less in labour; press-in bearings the reverse — the total lands in a similar band. Main dealers charge 30–50% more, and London and the South East sit at the top of the range.
Key things to know
- Wheel bearing and hub problems rank among the more commonly reported Yaris faults in common-fault guides and on owner forums — a hum that rises with road speed is the usual symptom.
- UK owners report rear bearings failing, occasionally in quick succession — and note how often tyre noise is misdiagnosed as a bearing (and vice versa).
- Front bearings can be extremely tight in the knuckle — accounts exist of bearings that wouldn't shift on a 10-tonne press without heat.
- On refit, the new snap ring's gap must align with the ABS sensor hole and the magnetic encoder side must face the sensor.
Good question
Questions Okay gets asked a lot
How much does a wheel bearing cost for a Toyota Yaris?
+
Expect £84–£279 per wheel fitted at a UK independent garage in 2026, covering the bearing or hub unit plus labour. On the Yaris the front is a press-in — cheaper part, more labour and the rear is a bolt-on hub unit — dearer part, quicker fit, so quotes can differ front to rear. Main dealers charge more; use our cost calculator to adjust for your region.
Is a Toyota Yaris wheel bearing a DIY job?
+
The rear is realistic for a competent home mechanic — the hub unit unbolts from the trailing arm with four bolts once the drum is off, though the bolts are usually corroded and need penetrating oil. The front is not: the bearing is pressed into the steering knuckle with a very tight fit, so the knuckle has to come off the car and go on a hydraulic press. For the front, garage labour is money well spent.
What does a worn wheel bearing sound like on a Toyota Yaris?
+
The classic sign is a humming, droning or growling noise that rises with road speed and often changes when cornering — louder turning one way, quieter the other. On the Yaris the same noise is regularly confused with tyre wear, so have the wheels spun and checked for play before paying for a bearing. A bearing with noticeable play or roughness is an MOT failure, so don't leave it once it's audible.
Get a price for your Toyota Yaris
Estimate the wheel bearing cost for your car and region, then compare quotes from trusted local garages.