Wheel bearing · 2026
Vauxhall Mokka wheel bearing cost
A wheel bearing replacement on a Vauxhall Mokka typically costs £96–£321 per wheel fitted at a UK independent garage. The Mokka and Mokka X (2012–19) use bolt-on sealed hub units front and rear with the ABS encoder built in — a dearer part but a quicker fit, with no press work at either end.
Front vs rear: what's the Vauxhall Mokka's bearing design?
The design decides the bill. A bolt-on hub unit is a dearer part but a quick fit; a press-in bearing is cheap but needs dismantling and a hydraulic press. Here's how the Mokka is built:
| Position | Design | What that means |
|---|---|---|
Front | Bolt-on hub unit | Mokka/Mokka X (2012–19) uses a bolt-on front hub/bearing assembly with a magnetic ABS encoder ring. The Mokka B (2021 on, shared platform with the Corsa F) hasn't been verified — check the parts listing for your build year. |
Rear | Bolt-on hub unit | The rear is a complete bolt-on hub/bearing assembly on the torsion beam, with the ABS encoder in the unit. |
Vauxhall Mokka wheel bearing replacement cost
A single wheel bearing on a Vauxhall Mokka typically costs £96–£321 per wheel fitted at a UK independent garage. Sealed hub units cost more in parts but less in labour; press-in bearings the reverse — the total lands in a similar band. Main dealers charge 30–50% more, and London and the South East sit at the top of the range.
Key things to know
- Both ends are hub-unit swaps — dearer part, less labour; typically 1–2 hours per corner, longer if the old hub has corroded into the knuckle.
- Correct torque on the hub bolts and axle nut is critical — UK owners with repeat 'failed' Mokka front bearings have traced the problem to hubs not torqued correctly at the previous repair.
- No widespread Mokka-specific premature-failure pattern is verified beyond normal bearing wear — hum rising with speed is the usual symptom.
Good question
Questions Okay gets asked a lot
How much does a wheel bearing cost for a Vauxhall Mokka?
+
Expect £96–£321 per wheel fitted at a UK independent garage in 2026, covering the bearing or hub unit plus labour. On the Mokka the front is a bolt-on hub unit — dearer part, quicker fit and the rear is a bolt-on hub unit — dearer part, quicker fit, so quotes can differ front to rear. Main dealers charge more; use our cost calculator to adjust for your region.
How long does a wheel bearing replacement take on a Vauxhall Mokka?
+
Both front and rear Mokka bearings are complete bolt-on hub assemblies, so a garage typically needs 1–2 hours per corner. The time creeps up if the old hub has corroded into its seat and needs heat and persuasion to free — common on higher-mileage UK cars. Because the part is a sealed unit with the ABS encoder built in, there's no press work and no separate sensor to disturb.
What does a worn wheel bearing sound like on a Vauxhall Mokka?
+
The classic sign is a humming, droning or growling noise that rises with road speed and often changes when cornering — louder turning one way, quieter the other. On the Mokka the same noise is regularly confused with tyre wear, so have the wheels spun and checked for play before paying for a bearing. A bearing with noticeable play or roughness is an MOT failure, so don't leave it once it's audible.
Get a price for your Vauxhall Mokka
Estimate the wheel bearing cost for your car and region, then compare quotes from trusted local garages.